Sense your arrival and leaving and automate managing lightings, curtains, locks, and appliances.
A patented solution to connect your smart home wherever you are, even without wifi connection.
Set a password to prevent unpermitted control, simplify the setup with profile sharing.
|Product Name||Yoswit Smart Bulb Converter|
|Compliance||CE, FCC, RoHS|
|Manufacturer||Designed by Yoswit in Hong Kong. Assembled in China.|
|Surface Materials||V0 flame-tesistant PBT+fiberglass|
|Operating Environment||Indoor (IP 20)|
|Operating Temperature Range||-10°C to 80°C|
|Operating Humidity Range||0-90% relative humidity, non-condensing|
|Frequency||60/50Hz auto detected at power-up|
|Resistive Load Current||60 watt|
|Inductive Load Current||60 watt|
|Standby Power||<0.3 watt|
|Product Compatibility||Bluetooth Smart Ready products|
|Radio Transmission Power||0~4 dBm|
|Bluetooth Range||Open area: >50m; indoor: 10-20m|
|Bluetooth Chips Manufacturer||TI|
|Bluetooth Chips Certification||BQB|
|Bluetooth Version||Bluetooth 4.0|
Full Demo Video
To prevent severe shock or electrocution, always disconnect the power at the service panel before installation. Only licensed electricians should carry out the installation.
Make sure the power is turned off.
Verify that your bulb are electrically rated to operate with the requirement as stated in the specification.
Remove your original light bulb.
Insert the Bulb Cap into the lamp holder.
Connect the bulb to the Bulb Holder.
Switch on the power of your lamp.
Change of Bulb Cap
Make sure the product is not connected to power.
Use one hand to press the Cap Lock button.
Open the Cap.
Proper align the appropriate Cap to the bottom of the Bulb Holder.
Hold the Cap and turn it clockwise until you hear a slap, which means the Bulb Cap is locked to the Bulb Holder.
Download the Yoswit App to your smat device and enjoy it now!
Yoswit will automatically detect the switch and add to your device list.