Sense your arrival and leaving and automate managing lightings, curtains, locks, and appliances.
A patented solution to connect your smart home wherever you are, even without wifi connection.
Set a password to prevent unpermitted control, simplify the setup with profile sharing.
|Product Name||Yoswit Smart Light Switch|
|Compliance||CE, FCC, RoHS|
|Manufacturer||Designed by Yoswit in Hong Kong. Assembled in China.|
|Surface Materials||V0 flame-resistant PC+ABS|
|Socket Type||Socket 120|
|Storage Conditions||-20°C to 60°C|
|Operating Temperature Range||-10°C to 40°C|
|Ingress Protection (IP)||20|
|Operating Humidity Range||0-90% relative humidity, non-condensing|
|Frequency||50/60Hz auto detected at power-up|
|Resistive Load Current||Max. 6A|
|Inductive Load Current||Max. 2A|
|Minimum Load Power||5 watt (*for 2-wire [without neutral wire] installation only)|
|Standby Power||<0.1 watt|
|Wiring Options||Wiring details available on the Installation page|
|Product Compatibility||Bluetooth Smart Ready products|
|Radio Transmission Power||0~5 dBm|
|Bluetooth Range||Open area: >50m; indoor: 10-20m|
|Bluetooth Version||Bluetooth 4.2|
|What's in the Box|
Full Demo Video
Real Product Demo
Wireless Switch Market Overview
With Neutral Wire
Without Neutral Wire
One model avaliable 1 model supports dimmable LED, CFL, incandescent and halogen bulbs
|On/Off / Dimmer Switch||One model supports Incandescent Lights Only|
|Arteor / Belanko / Mallia||N/A|
|GE Z-Wave Products||One model supports Incandescent Lights Only|
|Decora® Digital / Decora® Rocker Slide / Renu®||Vizia RF +®|
Comparison (Without Neutral Wire)
Yoswit Smart Switch
LUTRON Caseta Wireless
GE Dimmer Switch
Leviton Incandescent Scene Capable Switch
INSTEON Dimmer Switch
|Compatibility (Bulb Type)|
|Normal LED||Not specific||Not specific||Not specific|
|Magnetic Low-Voltage||Not specific|
|Electronic Low-Voltage||Not specific|
|Fluorescent lighting loads||Not specific|
|Central Hub||Not Required||Required||Required||Required||Required|
|Device Pairing||Not Required||Required||Required||Required||Required|
|Price||$54.90 - 69.90||$54.95 - 72.00||$56.99||$99.00||$49.99|
|Hub Price||No Hub Required||$59.95 - 80.00||$99.00||$99.00||$79.99|
|Voltage||100 - 240V||120V||120V||120V||120V|
|Socket Type||55 / 86 / 118 / 120||120 Only||120 Only||120 Only||120 Only|
|Color||23 Colors||4 Colors||White Only||3 Colors||6 Colors|
To prevent severe shock or electrocution, always disconnect the power at the service panel before installation. Only licensed electricians should carry out the installation.
Remove the old switch and disconnect the wires, please make sure that there is about 5mm of bare wire exposing.
Insert a small, flat screwdriver in notches on wall plate and twist gently to pry from frame to remove wall plate.
Connect the wires to the switch case. Make sure that the wires are secure.
To reduce risk of electrical shock, unit shall be properly grounded in accordance with local regulations or codes. Failure to connect the ground wire will result in an unsafe installation that could lead to personal injury.
Fasten the switch on wall by placing the proper wall mount components.
Turn on the circuit breaker and connect to the power.
Ensure the light indicator is on and test your on/off switch by tapping 2 to 3 times. Your lights will turn on/off.
Snap wall plate to frame. There are four click-stops for adjusting the fit of the wall plate to the switch and the wall.
Installation - LED Power Stabilizer (Optional)
After 2-wire (without neutral wire) wiring, in case you encountered conditions of circuit instability, lightings gleaming or no light, you may (i) adopt 3-wire (with neutral wire) wiring method, or (ii) place the power driver at two ends of any one lamp as the diagram below:
Download the Yoswit App to your smat device and enjoy it now!
Yoswit will automatically detect the switch and add to your device list.