Real Product Demo
Yoswit Smart Switch
- Zigbee / RF
We support Android 4.3 or above versions. It's the first Android version with Bluetooth Smart support which has just been released on Aug 2013.
|Product Name||Yoswit Smart Dimmer Module - TRIAC|
|Compliance||CE, FCC, RoHS|
|Manufacturer||Designed by Yoswit in Hong Kong. Assembled in China.|
|Surface Materials||V0 flame-resistant PC|
|Storage Conditions||-20°C to 60°C|
|Operating Temperature Range||-10°C to 50°C|
|Operating Humidity Range||0-90% relative humidity, non-condensing|
|Frequency||50/60Hz auto detected at power-up|
|Resistive Load Current||Max. 400 watt|
|Inductive Load Current||Max. 400 watt|
|Standby Power||<0.1 watt|
|Product Compatibility||Bluetooth Smart Ready products|
|Radio Transmission Power||0~5 dBm|
|Bluetooth Range||Open area: >50m|
|Bluetooth Version||Bluetooth 4.2|
To prevent severe shock or electrocution, always disconnect power at the service panel before beginning work. Only licensed electricians should carry out the installation.
Disconnect the wires of your lighting devices.
Connect the wires to the switch case. Make sure that the wires are secure.
To reduce risk of electrical shock, unit shall be properly grounded in accordance with local regulations or codes. Failure to connect the ground wire will result in an unsafe installation that could lead to personal injury.
Turn on the circuit breaker and connect to the power. Test your switch by tapping 2 to 3 times, or turn on/off the lights through our app. Your lights will turn on/off.
Download the Yoswit App to your smat device and enjoy it now!
|Leaflet||Smart Switch Module Full Catalogue|
|Yoswit App (Android Apk)||Download|